![Elsist UPserver 2.0 series Скачать руководство пользователя страница 7](http://html1.mh-extra.com/html/elsist/upserver-2-0-series/upserver-2-0-series_user-manual_2396510007.webp)
UPServer2.0
ON-LINE DOUBLE CONVERSION
Power cord (Input and output)
RS232 cable
If you ordered an optional Extended Battery Module (EBP), verify that the
following additional item is included with the EBP:
●
EBP user's guide
NOTE
Discard the EBP user's guide if you are installing the EBP with a new UPS at
the same time. Use the UPS user's guide to install both the UPS and the EBP.
Rackmount Installation
The Rackmount cabinet comes with all of the hardware required for installation in a
standard EIA or JIS seismic Rackmount configuration with square and round mounting
holes. The rail assemblies adjust to mount in 19” racks with a distance from front to rear
around 70~76 cm (27 to 30 inches) deep.
Checking the Rail Kit Accessories(Options)
Verify that the following rail kit items are included for each cabinet:
Left rail assembly:
- Left rail
- Rear rail
- (3) M5_8 pan-head screws
Right rail assembly:
- Right rail
- Rear rail
-(3) M5_8 pan-head screws
Rail hardware kit:
- (8) M5 butterfly nuts
- (2) rear stop brackets
- (8) M5 umbrella nuts
Mounting bracket kit:
- (2) mounting brackets
- (8) M4_8 flat-head screws
Tools Required
To assemble the components, the following tools may be needed:
cross-shaped screwdriver
5 and 6 mm wrench or socket
Rackmount Setup
CAUTION
The
cabinet is heavy. Removing the cabinet from its carton requires a
minimum of two people.
If installing optional EBP(S), make sure to install the EBP(S) directly below the
UPS so that all wiring between the cabinets is installed behind the front
covers and inaccessible to users.
NOTE
Mounting rails are required for each individual cabinet
To install the rail kit: