UPServer2.0
ON-LINE DOUBLE CONVERSION
1.
Introduction
This UPS protects your sensitive electronic equipment from most common power problems,
including power failures, power sags, power surges, brownouts, line noise, high voltage spikes,
frequency variations, switching transients, and harmonic distortion.
Power outages might occur unexpectedly and power quality can be erratic. These power problems
have potential to corrupt critical data, destroy unsaved work sessions, and damage hardware —
causing hours of lost productivity and expensive repairs.
With the UPS, you can safely eliminate the effects of power disturbances and guard the integrity
of your equipment. Providing outstanding performance and reliability, the UPS's unique benefits
include:
True online double-conversion technology with high power density, utility
frequency independence, and generator compatibility. Output power factor
up to 0.9.
Three segment charging mode to increase battery service life, optimize
recharge time.
Selectable High Efficiency mode of operation.
Cold start function to startup the UPS without utility.
Standard communication options: one RS-232 communication port, one
USB communication port, and relay output contacts or SNMP card.
Power Shedding function may turn off uncritical load in battery backup to
make longer backup time for critical load.
Extended runtime with up to four Extended Battery Modules (EBPs) per UPS.
Emergency shutdown control through the Remote Emergency Power-off
(EPO) port.
The content displayed on the interface is rich. The capacity of the loads and
the battery can be seen directly and the FLASH pictures and fan rotating icon
can be displayed while charging. Enhance, it is easy to know its operation
status. When UPS fails, it can show the fault code; therefore, the UPS can
be repaired as soon as possible by inquiring fault code table.
NOTICE: In the manual, RT is short for Rack-Tower conversion
Rack/Tower convertible LCD design. No matter what angle required, only
pressing the key slightly to reach your perspective needs.
For RT model, it is equipped with hot swappable battery feature needed for
19”rack solution.
RT models in a space-optimizing 2U size fits any standard 19” rack.
Fig.1
Fig.2
Figure1
– UPS Front View
Figura2
– Battery Expansion “EBP” Front View
