UPServer2.0
ON-LINE DOUBLE CONVERSION
★ _indicator flashes
▲ _the status of indicator depends on other conditions
Display Functions
As the default or after 5 minutes of inactivity, the LCD displays the
output parameters.
The backlit LCD automatically dims after 5 minutes of inactivity. Press
any button to restore the screen.
LCD display comprises numerical value section, capacity graphics section, fan-status graphics
section and charger-status graphics section , refer to Table 4 for detail.
Table 4. LCD display section
Section
Description
Graphic
Numerical
value
section
Display the corresponding numerical
value of inquiring items(output, load,
temperature, input, battery), for
example, as the graphics shows above,
the output voltage is 230v, the output
frequency is 50Hz.
Capacity
graphics
section
Display the capacity of the battery and
load. Every pane represents 20 ％
capacity. As graphics shown above,
the capacity of the battery is 80 ％
-100 ％ ( 5 panes), the load reaches
40 ％ -60 ％ (3 panes). When UPS is
overloaded, the icon will flash, when
battery is weak or disconnected, the
icon will also flash.
Fan-status
graphics
section
Display if the fan works normally.
When the fan works normally, it will
show the dynamic fan blades rotating;
when the fan works abnormally, the
icon
will keep on flashing with the
warning .
