UPServer2.0
ON-LINE DOUBLE CONVERSION
Temperature
Display the temperature of the
inverter in the UPS. As the
following graphics shown: the
temperature of the inverter is 37℃.
Input
Display the voltage and frequency
of the input. As the following
graphics shown: the input voltage is
210v, input frequency is 49.8Hz.
Battery
Display the voltage and capacity of
the battery . As the following
graphics shown: the battery voltage
is 38v, the capacity of battery is
100 ％ (the capacity of battery is
approximately reckoned according
to the battery voltage).
Battery
remaining time
Display the battery remaining time
when under battery mode. The
number is from 0 to 999 minutes. As
the following graphics shown: there
are 686 minutes left for discharging.
User Settings
The UPS has setting functions. This user settings can be done under any kind of UPS working
mode. The setting will take effect under certain condition. Below table describes how to set the
UPS.
Table 6. User Settings
Setting
function(serial
number)
Setting procedure
LCD display
① Enter the setting interface.
Press and hold the function
setting key
for more than 2
seconds, then come to setting
