UPServer2.0
ON-LINE DOUBLE CONVERSION
③．Confirm the battery strings
setting interface。
After selecting numerical value,
press and hold the function
setting key
for more than half
a second (less than 2 seconds).
Now, the battery strings setting
is confirmed and the battery
type value below will flash。
④ set the battery type in the
same way.
⑤Exit from the setting interface.
Press and hold function setting
key
for more than half a
second (less than 2 seconds),
exit from the setting interface
and return to main interface.
Load segment
setting（5）
① Enter the setting interface.
Press and hold the function
setting key
for more than 2
seconds, then come to setting
interface, Press and hold the
scroll key
for more than half a
second(less than 2 seconds),
select the function setting,
choose
battery
setting
interface, at the moment, the
letters “Seg 1” will flash.
② Enter the load segment
setting interface. Press and hold
the function setting key
for
more than half a second(less
than 2 seconds), then come to
setting interface of load
segment, the letters “Seg 1”
will stop flashing. The numerical
value below the “Seg 1” will
flash. Press and hold the scroll
key
for more than half a
second (less than 2 seconds),
select the battery voltage,
10.5v ， 11.0v ， 11.5v(default is
10.5v)。
③Confirm the power shedding
shielding
battery
voltage
setting.
After
selecting
numerical value, press and hold
the function setting key
for
more than half a second (less
than 2 seconds). Now, the load
shielding
battery
voltage
setting is confirmed.
④ Exit from the setting
interface. Press and hold
function setting key
for more
than half a second (less than 2
seconds), exit from the setting
interface and return to main
interface.
