UPServer2.0
ON-LINE DOUBLE CONVERSION
3.
INSTALLATION
This section explains:
Equipment inspection
Unpacking the cabinet
Checking the accessory kit
Cabinet installation
Wiring installation
Initial startup
Inspecting the Equipment
If any equipment received has been damaged during shipment, keep the
shipping cartons and packing materials for the carrier or place of purchase and
file a claim for shipping damage. If you discover damage after acceptance, file a
claim for concealed damage.
To file a claim for shipping damage or concealed damage: 1) File with the carrier
within 15 days of receipt of the equipment; 2) Send a copy of the damage claim
within 15 days to your service representative.
NOTE
Check the battery recharge date on the shipping carton label. If the date has expired and the
batteries were never recharged, do not use the UPS. Contact your service representative.
Unpacking the Cabinet
CAUTION
Unpacking the cabinet in a low-temperature environment may cause
condensation to occur in and on the cabinet. Do not install the cabinet until
the inside and outside of the cabinet are absolutely dry (hazard of electric
shock).
The
cabinet is heavy (see page 65). Be careful to unpack and move the
cabinet.
Carefully to move and open the carton. Keep the components packaged until
ready to install.
To unpack the cabinet and accessories:
1.
Open the outer carton and remove the accessories packaged with the cabinet.
2.
Carefully lift the cabinet out of the outer carton.
3.
Discard or recycle the packaging in a responsible manner, or store it for future
use.
Place the cabinet in a protected area that has adequate airflow and is free of
humidity, flammable gas, and corrosion.
Checking the accessories
It includes：
UPS user's guide
Software Suite CD
USB cable
