Elkron MR16, Инструкция по установке и эксплуатации

Страница: 32 / 44

32 Installation and use MR16
5.2 TEST ACTUATION DEVICES
Switch input BL over, to give ringing command to mounted sirens. If a siren did not ring, check that it is
able to communicate with radio control panel MR16 and position it back elsewhere, if needed.
5.3 TEST REMOTE CONTROL
Try to arm and disarm radio module MR16. One remote control beep will confirm that commands were
received.
5.4 USER TRAINING
After completing system installation, configuration and test, show the user how:
•
alarm warnings on radio module MR16 are interpreted;
•
sirens warnings are interpreted;
•
radio module MR16 alarm memories are erased;
•
radio module MR16 is armed and disarmed by remote control, if provided for.