Elkron MR16, Инструкция по установке и эксплуатации

Страница: 35 / 44

Installation and use MR16 35
6.2.1 Opening micro contact DC500
To open micro contact:
1. If micro contact is already wall mounted, take off first hole covering caps, then securing screws (figure
12).
2. Unscrew closing screw on micro contact bottom and take off the cover.
For closing, operate in reversed way.
Warning: in putting the cover back, check it to be correctly hooked before fixing closing screw.
6.2.2 Opening IR detector IR500
To open IR detector:
1. Loosen closing screw on detector lower side.
2. Take off front cover, which contains the detector and electronic part.
For closing, operate in reversed way.
Warning: in putting the cover back, check it to be correctly hooked before fixing closing screw.