Elkron MR16, Инструкция по установке и эксплуатации

Страница: 36 / 44

36 Installation and use MR16
6.2.3 Opening the battery compartment of HP500 siren
After opening outdoor siren as illustrated in paragraph 4.5.1 Power supply , open battery opening by
unscrewing the 4 screws which keep closed battery opening cover.
For closing, operate in reversed way.
6.3 RESET
6.3.1 Reset radio module MR16
To cancel all radio module MR16 acquisitions:
1. Power off radio module MR16.
2. Set DIP switch B8 on radio module to ON, keep programming key pressed and power back the
device.
3. All LEDs are lit and radio module sends out 2 beeps. Acquired devices are removed.
4. Set DIP switch B8 to OFF again: radio module MR16 returns to operation mode.
6.3.2 Reset sirens
To reset a siren:
1. take off its batteries and let them off for one minute
2. set its DIP switch 6 to ON
3. insert the batteries ((the siren sends out one beep)
4. reset DIP switch 6 to OFF
Resetting a siren involves that it is acquired back from radio module MR16.