Elkron MR16, Инструкция по установке и эксплуатации

Страница: 6 / 44

6 Installation and use MR16
1.3 SYSTEM COMPONENTS
1.3.1 Radio module MR16
Outdoor bidirectional radio module controls the whole wireless system and
processes information from peripheral units; it makes up the interface
between wired alarm control panel and wireless devices.
The module includes:
•
8 outputs with solid state relays for warnings from wireless detectors;
•
1 output with solid state relays for physical sabotage alarm warning;
•
1 output with solid state relays for radio sabotage alarm warning;
•
1 output with solid state relays for battery low warning;
•
1 output with solid state relays for arming/disarming command via remote
control;
•
1 output with solid state relays for radio module (arm/disarm) status
repetition;
•
1 input for radio module tamper;
•
1 input S to detect wired alarm control panel status;
•
1 input BL to arm wireless sirens from wired alarm control panel.
The module takes power supply out of wired alarm control panel it is
connected to.
Other radio module characteristics are:
•
protection against opening and removal;
•
relays which can be biased via jumpers;
•
status and warning LEDs.
1.3.2 Micro contact DC500
Magnetic detector to detect opening or closing status in door or window it is
mounted on. It is supplied by a lithium battery and communicates via radio
with radio module MR16 in bidirectional mode.
Microcontact DC500 has a programmable auxiliary input, to which there can
be connected either other NC (normally closed) detectors (e.g. magnetic
detectors) or a shutter detector; micro contact DC500 has also LEDs to warn
about radio communication. Programming is by jumpers. A tamper assures
protection against opening and removal.
The device has test, supervision and battery low warning functions.
The device is also available in version with colour brown.
1.3.3 Indoor IR detector IR500
Detector with passive infrared rays to detect movements in area supervised
by it. It is supplied by a lithium battery and communicates via radio with radio
module MR16 in bidirectional mode.
Detector IR500 has LEDs to warn about radio communication.
A tamper assures protection against opening and removal.
The detector can be mounted in angular position by provided support.
The device has test, supervision and battery low warning functions.