Elkron MR16, Инструкция по установке и эксплуатации

Страница: 5 / 44

Installation and use MR16 5
1 – GENERAL DESCRIPTION
1.1 SYSTEM ARCHITECTURE
MR16 system allows to add wireless devices to an anti-intrusion system, although not prearranged to
manage radio devices.
The system includes a bidirectional radio module interfacing to the inputs and outputs of any wired control
panel, and a range of detectors and wireless devices by which existing anti-intrusion system can be
extended.
Wireless communication is bidirectional and the system is provided with protection means against
physical sabotage and radio sabotage (jamming).
The constancy of radio communications between devices and radio module MR16 is controlled by
supervision function.
The system can be programmed and personalised according to individual needs.
The status of system and single detectors is displayed via LEDs.
Radio module MR16 takes power supply out of wired control panel it is connected to, while wireless
devices are supplied via lithium batteries.
1.2 SYSTEM MAXIMUM DIMENSIONS
Bidirectional radio module MR16 can manage up to:
•
16 radio input devices (micro contacts DC500 and volumetric detectors IR500) on choice.
•
2 sirens either indoor (IS500) or outdoor (HP500).
•
8 remote controls RC500.
•
8 output connections to wired alarm control panel for detectors warnings.
•
4 alarm connections to wired alarm control panel.
•
2 output connections per command and status repetition to wired alarm control panel.
•
2 input connections from wired alarm control panel.