Eliet Minor 4S, Руководство пользователя, Страница: 47 / 58

English
47
12. Storing the machine
Storage preparations
• Clean the machine (see § 11.3 Cleaning the machine).
• Carry out a major overhaul (see § 11.5, Maintenance after 20 operating hours).
• Check all nuts and bolts and fasten them where necessary. Most bolts require the use of two
spanners of 13, 13, and 17 mm and wrenches 4, 5 or 6.
• Empty the fuel tank either by running the engine until the machine runs out of fuel, or by
using a siphon to pump the petrol back into the jerry can (read the safety instructions under §
9.2 Refuelling).
• Remove the spark plug (see § 11.5.2 Checking and/or replacing the spark plug). Spray some
MoS
2
-based penetrating oil into the cylinder. Pull the starter cord until the piston is in its
uppermost position. Replace the spark plug.
• To avoid rust on the machine, touch up all chipped areas or treat them with anti-rust grease.
Original paints/enamels in the appropriate colours are available from your ELIET dealer.
• Allow the engine to cool down before storage.
• If the machine is stored outdoors, it must be properly covered with a tarp. Avoid precipitation
coming in direct contact with the machine. ELIET highly recommends a sheltered storage
place.
• Store the machine out of the reach of children.
• Never store the machine near heat sources or open flames
(at least 2 m distance).