Eliet Minor 4S Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 58

Eliet Minor 4S Скачать руководство пользователя страница 13

English

13

7.2 Safety features

Emergency stop bracket:

This bracket is located around the feed opening. Pushing it back
will stop the engine.

Shredding chamber cover plate:

This cover plate protects the user against injury from the bla-
des when the engine is running. The engine stops automatically
as soon as the star knob on the cover plate is loosened to open
the cover.

Safety shield:

The steel plate located in the feed opening protects the opera-
tor against flying wood chips. Placing one's hands beyond this
steel plate is strictly prohibited.

Feed hopper:

The hopper is mounted on the feed opening, pointing towards
the operator. If, despite the warning, the user should reach
beyond the protective shield, the obstruction formed by the
hopper prevents easy access to the shredder compartment
and makes injuries inflicted by the blades via the feed opening
practically impossible.

Belt protection cover:

The cover ensures that all the rotating parts of the driver
mechanism that might cause injuries are adequately screened
off.

Safety set:

For your safety, we strongly recommend using the supplied set
of safety tools, consisting of safety goggles, ear protection and
a pair of rigger gloves.

«
...
11
12
13
14
15
...
»

Содержание Minor 4S



























































Отзывы:

Нет отзывов