Eliet Minor 4S, Руководство пользователя, Страница: 20 / 58

English
20
When first removed from its packaging, the machine is not yet fully assembled. It is the task
of the dealer to finish the assembly. Below we provide a few
guidelines:
• The first part to be mounted is the handlebar. It is locked into
position in the provided holes using two M6 bolts (use a size 10
spanner).
• Then, the hopper at the front of the feed opening must be
installed using the M6 bolts, pinions and nuts
• Next, the wheel axis is slid onto the chassis and fixed with two
pinions, after which the wheels can be slid onto the wheel axes.
Before doing so, a little grease (Sunoco Multi-purpose LR-EP2)
may be applied to the roller bearings. Finally, the wheels are
tightened to the axes using the supplied Starlock caps.
• The machine's blow chute is pointed to the front of the machine. This must first be turned
before the machine may be operated.
The way in which this blow chute must be turned is described in appendix B1.
• The dealer will set the belt tension according to the details in the maintenance section of the
instruction booklet (§ 11.5.5 Belt tension adjustment) Every Eliet dealer is co-responsible for a
long life span of Eliet machines. He shall lubricate all hinges before delivering the machine to
the client.
• Machines do not contain any oil or fuel when they are packed. The dealer will fill the oil and
petrol tanks according to the instructions in this manual (or that of the engine manual).
• The rpm will be set at 3,200 rpm.
• The dealer will perform a test run on the machine and confirm that everything is functioning
properly (e.g. safety switches, emergency stop...).
• Finally, the dealer ensures that the user immediately registers the machine online in order to
make sure that his right to the warranty is activated.