Eliet Minor 4S Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 58

Eliet Minor 4S Скачать руководство пользователя страница 11

BQ 505 014 100

English

11

7. Safety instructions

7.1 Safety messages

The safety messages are clearly indicated on the machine with stickers or relief pictograms.
Please take good notice of the symbols and warning messages displayed.

This sticker is affixed to the deflector valve and warns about
the danger of injuries when one is standing in the discharge
area while the machine is working.

This sticker is affixed to the cover of the driving belt. It indicates
the potential danger arising when the cover is removed while
the engine is running. The machine may never be operated
without the cover. The engine must be switched off before
removing the cover at all times.

This sticker is glued to the side of the machine. It provides a
summary of the general safety regulations by using icons:
1.  The manual should be read and understood before operating
the machine.
2.  Suitable safety clothing (gloves, safety goggles, ear protec-
tion) must be worn when operating the machine.
3.  Working with or performing maintenance on the machine
involves a risk of cuts to the hands. Be alert and careful.

«
...
9
10
11
12
13
...
»

Содержание Minor 4S



























































Отзывы:

Нет отзывов