Eliet Minor 4S Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 58

Eliet Minor 4S Скачать руководство пользователя страница 32

English

32

Caution:

Maintenance must always be carried out with the engine turned off.

Caution:

Always wear safety gloves when performing maintenance. Additionally, safety
goggles may be required for certain operations. These are supplied with the
machine.

11.2 Maintenance schedules

11.2.1 Lubricants

Engine (0.75 l.)

SUNOCO SUPER DENALUBE
SAE 20 W 50 API SF / CC

Hinges

NOVATIO WHITE SUPREME GREASE

Wheel axles

SUNOCO MULTI-PURPOSE GREASE LR
- EP2

11.2.2 Special maintenance

A. Special maintenance of the blades

Once mounted on the blade shaft, the blades will settle into position after a short break-in
period. This can cause the tension on the bolts to decrease, with the risk of the blades becoming
dislodged in between the blade plates. This can cause irrevocable fatigue failure of the blade
shaft and must be prevented by scheduling extra maintenance after a brief running-in period.

WHEN:

Within the first five operating hours after commissioning the new machine.
Within the first 5 hours after reversing the blades.
Within the first 5 hours after replacing the blades.

WHAT:

Check the torque of the bolt connections securing the blades and tighten them as

required (torque: 25 Nm).

«
...
30
31
32
33
34
...
»

Содержание Minor 4S



























































Отзывы:

Нет отзывов