Eliet Minor 4S Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 58

Eliet Minor 4S Скачать руководство пользователя страница 3

English

3

1. Introduction

1.1 Read this operation manual carefully

ELIET machines are designed for safe and reliable use; this requires their operation in accordan-
ce with the instructions provided. Carefully read these operating instructions before using the
machine. Failure to do so may result in personal injury or damage to the equipment.

1.2 Identification data – ELIET MINOR 4S

Copy the identification data of your machine into the text boxes:

Article number:

MA

Serial number:

Year of manufacture:

20

2. Warranty

2.1 Warranty card

Whoever wishes to avail of the guarantee must

register his machine online

:

www.elietmachines.com

- Customer Support - Register.

If you do not have an internet connection available, you can also returned the completed
registration card to:
ELIET EUROPE NV, Diesveldstraat 2, B – 8553 Otegem (Belgium)
Tel. +32 56 77 70 88 - Fax +32 56 77 52 13
Read the warranty conditions on the attached warranty card.

For your information:

Any technical problems or defects that occur as a
result of poor maintenance make the warranty null and void. Chapter 11 provides
an overview of the maintenance intervals and recommendations regarding
maintenance requiring the intervention of an authorised dealer.

«
1
2
3
4
5
...
»

Содержание Minor 4S



























































Отзывы:

Нет отзывов