Eliet Minor 4S Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 58

Eliet Minor 4S Скачать руководство пользователя страница 31

English

31

11. Maintenance

11.1 General

ELIET recommends that the machine be brought to an official ELIET dealer for a major overhaul
each year (find an authorised ELIET dealer near you at

www.eliet.eu

). Your ELIET dealer is at

your service for maintenance and advice at all times. He stocks genuine ELIET replacement parts
and lubricants. His staff can always obtain advice and service from ELIET’s help desk in order to
provide you with an impeccable after-sales service.

Caution:

Use only genuine ELIET spare parts when performing repairs. These service
parts are manufactured according to the same strict quality requirements and
craftsmanship as the original equipment. You can always consult the list of
original replacement parts and their ordering codes at

www.eliet.eu

.

Perform maintenance in a room intended for this purpose. The area must meet the following
criteria:
•  Spacious
• Dust-free
•  Easily accessible
•  Clean and tidy
•  Well lit
• Quiet
These characteristics are important to properly carry out maintenance tasks.

Warning:

Maintenance performed in an incorrect manner may compromise the
operator’s safety. Damage or consequential damages that arise from
insufficient or faulty maintenance will void the warranty. Thus, maintenance
must always be performed by experienced technicians.

«
...
29
30
31
32
33
...
»

Содержание Minor 4S



























































Отзывы:

Нет отзывов