Eliet Minor 4S Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 58

Eliet Minor 4S Скачать руководство пользователя страница 2

English

2

This booklet provides information about the actual use and maintenance of
the machine.

Read it carefully and keep it in a safe place for future reference.

Please also keep your

purchasing invoice

or receipt together with this booklet.

Register

your purchase online on

www.eliet.eu

.

Attention:

When putting a new machine into operation you must check the

tension of all of the blade bolts

during the first five working hours. Failure to

do so may result in blades coming loose. This may cause serious consequential
damage to your new machine and the operator is at risk of injuries or even
death. ELIET cannot be held liable for any consequences of this negligence and it
also voids any related warranty claim.

© ELIET
Copyright 2012 ELIET. All rights reserved. All textual material, drawings, illustrations, diagrams, graphs, etc., included in this ELIET booklet are protected by copy-
right and also by other intellectual property rights. None of this information may be copied for commercial purposes or distribution and/or changed or reposted
for other purposes. The copyright on the content included in this ELIET manual remains the exclusive property of its respective owners.

«
1
2
3
4
...
»

Содержание Minor 4S



























































Отзывы:

Нет отзывов