Eliet Minor 4S Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 58

Eliet Minor 4S Скачать руководство пользователя страница 37

English

37

11.4.3 Cleaning the air filter

• The type of air filter depends on the engine brand and type.
• The air filter is located under the black protection cover next to the fuel reservoir on the

engine.

• Loosen the black protection cover.
• There are two types of filter. Besides the common sponge filter there is a filter that, as in an

automobile, consists of paper layers.

• Sponge filters can be cleaned by rinsing them with some petrol and blowing them with

compressed air.

• Paper filters are cleaned by dusting them down or cleaning with compressed air.
• After cleaning, return all parts to their original positions.

Caution:

In the event the machine has toppled over for some reason, check the air filter
immediately. The unusual position of the engine may have caused oil to seep
from the crankcase via the carburettor onto the air filter. Oil on the filter paper
obstructs the air passage. Soiled filters must be replaced immediately.

11.4.4 Sharpening the blades

Sharp chipping blades will provide optimum performance and maximum operating speed. En-
hance your own work comfort by taking some time to check the blades, and if necessary, sharpen
them.

SHARP BLADES = MAXIMUM OUTPUT

For your information:

The blades need not be disassembled for sharpening. Use a small right-angle
grinder equipped with a grinding disc that is suitable for steel.

Warning:

Always wear safety glasses and ear protection when sharpening blades. Gloves
are also required when performing maintenance.

«
...
35
36
37
38
39
...
»

Содержание Minor 4S



























































Отзывы:

Нет отзывов