Eliet Minor 4S, Руководство пользователя, Страница: 38 / 58

English
38
Warning:
When tilting, petrol can leak out from the filler cap of the reservoir. Pump any
surplus petrol from the reservoir using a siphon, as a spark from sharpening
the blade can cause fire.
• Tilt the machine forward until it leans on its front base and
the handlebar (see illustration).
• Disassemble the cover plate at the back of the machine by
removing the star screw and unhooking the cover from the
machine.
• When sharpening, the grindstone of the right-angle grinder should be pulled along the bevelled
side. Ensure that the cut retains its original angle. The top of the blade suffers most during
chipping. Grind it as little as possible to avoid weakening. Correct and timely sharpening of the
chipping blades will extend blade life.
For your information:
As soon as the top of the cutting edge becomes dull,
the blades are used up and have to be
replaced or reversed.
A blade has two sides.
• The front of the blade has the two bevelled cutting edges. (F)
• At the back, the tooth profiling of the cutting area is clearly visible. (R)
A sharp cutting edge and correct cutting angle are essential for efficient chipping. Blades must
be correctly sharpened to ensure these two features can be realised.