Eliet Minor 4S Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 58

Eliet Minor 4S Скачать руководство пользователя страница 34

English

34

11.3 Cleaning the machine

11.3.1 The importance of cleaning

ELIET recommends cleaning the machine after each use. We recommend performing an
inspection each time you clean the machine to check component and machine integrity. This
allows timely intervention and prevention of any defects, ensuring a longer service life of your
machine.

Failure to regularly clean the machine will lead to:
•  Increased wear.
•  Increased risk of fire.
•  Reduced engine cooling.
•  Increased risk of short circuits.
•  Reduced performance.
•  Illegibility of safety stickers.
•  Not noticing defects or wear at an early stage.
•  Fire risk

REMARK:

Failure to perform the daily clean-up will result in loss of warranty.

Warning:

Any suboptimal performance of the machine can compromise the operator’s
safety.

Warning:

Wood residue, chippings and fine dust can accumulate under the covers and
cause a fire as a result of overheating. Avoid dirt accumulating near electric
components or the engine. Clean the machine thoroughly on a daily basis.

Caution:

Wear suitable clothing for cleaning activities. Utility gloves are essential.

«
...
32
33
34
35
36
...
»

Содержание Minor 4S



























































Отзывы:

Нет отзывов