Eldes ESIM264, Руководство по установке

Страница: 40 / 60

78 79 78 79 EN EN MANUAL ELDES ESIM264 V3.2 MANUAL ELDES ESIM264 V3.2
View MIN and
MAX temperature
boundaries
SMS
SMS text message content:
ssss_TEMP
Value: ssss – 4-digit SMS password.
Example: 1111_TEMP
EKB2
Menu path:
MIN: OK → CONFIGURATION → OK → aaaa → OK → PRIMARY SETTINGS → OK →
TEMPERATURE SENSOR
→
OK
→
TEMP. MIN
MAX: OK
→
CONFIGURATION
→
OK
→
aaaa
→
OK
→
PRIMARY SETTINGS
→
OK
→
TEMPERATURE SENSOR → OK → TEMP. MAX
Value: aaaa – 4-digit administrator password.
Config
Tool
This operation may be carried out from the PC using the ELDES Configuration Tool software.
By default, Temperature Info SMS is enabled. To disable/enable it, please refer to the following configuration methods.
Disable Temperature
Info SMS
SMS
SMS text message content:
ssss_TEMP:00:00
Value: ssss – 4-digit SMS password.
Example: 1111_TEMP:00:00
EKB2
Menu path:
Temperature fallen: OK
→
CONFIGURATION
→
OK
→
aaaa
→
OK
→
SMS MESSAGES
→
OK
→
TEMP LOW EVENT → OK → DISABLE → OK
Temperature exceeded: OK → CONFIGURATION → OK → aaaa → OK → SMS MESSAGES → OK
→ TEMP HIGH EVENT → OK → DISABLE → OK
Value: aaaa – 4-digit administrator password.
EKB3
Enter parameter 25, event number and parameter status value:
25 14 0 # - Temperature fallen
25 15 0 # - Temperature exceeded
Example: 25140#
Config
Tool
This operation may be carried out from the PC using the ELDES Configuration Tool software.
Enable Temperature
Info SMS
EKB2
Menu path:
Temperature fallen: OK
→
CONFIGURATION
→
OK
→
aaaa
→
OK
→
SMS MESSAGES
→
OK
→
TEMP LOW EVENT → OK → ENABLE → OK
Temperature exceeded: OK → CONFIGURATION → OK → aaaa → OK → SMS MESSAGES → OK
→ TEMP HIGH EVENT → OK → ENABLE → OK
Value: aaaa – 4-digit administrator password.
EKB3
Enter parameter 25, event number and parameter status value:
25 14 1 # - Temperature fallen
25 15 1 # - Temperature exceeded
Example: 25151#
Config
Tool
This operation may be carried out from the PC using the ELDES Configuration Tool software.
25. REMOTE LISTENING AND 2-WAY VOICE COMMUNICATION
ESIM264 comes equipped with a microphone that allows the user to listen on his mobile phone to what is happening in the secured area.
By installing one of the audio module EA2, the user will be able to have a 2-way voice communication (see 31.3.2. EA2 – Audio Output
Module with Amplifier ). Remote listening and 2-way voice communication can op erate under the following conditions:
• The system makes a phone call to a listed user phone number in case of alarm and the user answers the call.
• The user initiates remote listening by sending the SMS text message, the system makes a phone call to the user phone number that the
SMS text message was sent from and the user answers the call.
Initiate remote
listening
SMS
SMS text message content:
ssss_MIC
Value: ssss – 4-digit administrator password
Example: 1111_MIC
Set microphone gain
EKB2
Menu path:
OK → CONFIGURATION → OK → aaaa → OK → PRIMARY SETT INGS → OK → GSM AUDIO → OK
→ MICROPHONE GAIN → OK → mg → OK
Value: aaaa – 4-digit administrator password; mg – microphone gain, range – [0... 15].
Config
Tool
This operation may be carried out from the PC using the ELDES Configuration Tool software.
Set speaker level
EKB2
Menu path:
OK
→
CONFIGURATION
→
OK
→
aaaa
→
OK
→
PRIMARY SETT INGS
→
OK
→
GSM AUDIO
→
OK
→
SPEAKER LEVEL
→
OK
→
sl
→
OK
Value: aaaa – 4-digit administrator password; sl – speaker level, range – [0... 85].
Config
Tool
This operation may be carried out from the PC using the ELDES Configuration Tool software.
ATTENTION: Phone calls to the listed user phone number in case of alarm are disabled by force when MS mode is enabled
(see 30. MONITORING STATION).