Eldes ESIM264, Руководство по установке

Страница: 4 / 60

6 7 6 7 EN EN MANUAL ELDES ESIM264 V3.2 MANUAL ELDES ESIM264 V3.2
1. GENERAL INFORMATION
1.1. Functionality
ESIM264 – micro-controller based alarm system for houses, cottages, country homes, garages and other buildings, also capable of manag-
ing electrical appliances via cellular GSM/GPRS network. It can also be used as Intercom system.
Examples of using the system:
• Property security.
• Alarm switch.
• Thermostat, heating and air-conditioner control, temperature monitoring.
• Lighting, garden watering, water pump and other electrical equipment control via SMS text messages.
• Remote listening to what is happening in the secured area.
• Main 230V power status with SMS text message.
• Two-way intercom device via GSM network.
1.2. Compatible Device Overview
Wired Devices
Device Description Max. Connectible Devices
EKB2 LCD keypad 4*
EKB3 LED keypad 4*
EA1 Audio output module with 3,5mm jack 1**
EA2 Audio amplifier module 1W 8Ω 1**
EPGM1 16 zone and 2 PGM output expansion module 1
EPGM8 8 PGM output expansion module 1**
Wireless Devices
Device Description Max. Connectible Devices
EWD2 Wireless magnetic door contact/shock sensor/flood sensor 16***
EWK1**** Wireless keyfob with 4 buttons 5****
EWK2**** Wireless keyfob with 4 buttons 5****
EWS2 Wireless outdoor siren 16***
EWS3 Wireless indoor siren 16***
EWF1 Wireless smoke detector 16***
* - A mixed combination of EKB2 and EKB3 keypads is supported. The combination can consist of up to 4 keypads in total.
** - Only 1 of these modules can be connected at a time if the module slots are implemented in ESIM264 unit.
*** - A mixed combination of wireless devices is supported. The combination can consist of up to 16 wireless devices in total.
**** - A mixed combination of EWK1 and EWK2 keyfobs is supported. The combination can consist of up to 5 keyfobs in total.
***** - EW2 creates 4 wireless zones, therefore the max. number of connectible EW2 devices is 8 if no keypad zones, no EPGM1 and no
virtual zones exist in the system’s configuration.
1.3. Default Parameters and Ways of Parameter Configuration
Main Settings
Parameter Default Value
Configurable by:
SMS EKB2 EKB3
Configuration
Tool
SMS and EKB2 Menu Language
Depends on firmware version according to user‘s lo-
cation
   
SMS Password 0000
   
User Code 1 1111
  
User Code 2... 30 N/A
  
Administrator Password 1470
  
Duress Password N/A
  
SGS Password N/A
  
User 1... 5 Phone Number N/A
   
Allow Control from Any Phone Number Disabled
   
Date and Time N/A
   
Exit Delay - Partition 1... 4 15 seconds
   
Info SMS Scheduler Frequency (days) – 1; Time - 11
   
Zones
Parameter Default Value
Configurable by:
SMS EKB2 EKB3
Configuration
Tool
Zone Name
Z1 - Zone 1; Z2 - Zone 2; Z3 - Zone 3; Z4 - Zone 4; Z5 -
Zone 5; Z6 - Zone 6
 
Entry Delay 15 seconds
   
On-Board Zone Delay 800 milliseconds

EPGM1 Zone Delay 800 milliseconds

On-board Z1 Zone Type Delay
  
On-board Z2... Z12 Zone Type Instant
  
Keypad Zone Type Instant
  
EPGM1 Zone Type Instant
  
Wireless Zone Type Depends on the connected wireless device
  
Virtual Zone Type Interior Follower
 
ATZ Mode Disabled
  
6-Zone Mode: Zone Connection Type Type 1
  
ATZ Mode: Zone Connection Type Type 4
  
On-board Zone Status Enabled
   
Keypad Zone Status Disabled
   
EPGM1 Zone Status Enabled
   
Wireless Zone Status Depends on the connected wireless device
   
Virtual Zone Status Disabled
 
Stay attribute for individual zone Disabled
  
Alarm Count to Bypass 0

Arm-Disarm by Zone N/A
  
Force atrribute for individual zone Disabled
  
Tamper Name
Tamper 1, Tamper 2, Tamper 3, Tamper 4, Tamper 5,
Tamper 6 etc.

Chime Enabled
  
PGM Outputs
Parameter Default Value
Configurable by:
SMS EKB2 EKB3
Configuration
Tool
PGM Output Name
C1 – Controll1, C2 – Controll2, C3 – Controll3, C4 – Con-
troll4 etc.
 
PGM Output Status Disabled
   
EPGM8 PGM Output Status Disabled
   
EPGM1 PGM Output Status Disabled
  
Wireless PGM Output Status Enabled
   
Wireless PGM Output Type Depends on the connected wireless device

PGM Output Control by Event 1... 16 Disabled
 
PGM Output Control by Event Manage-
ment

Scheduler 1... 16 Disabled

Turn ON/OFF PGM Output by Timer

Using Module EPGM8 Mode Disabled
  
Alarm Duration and Siren
Parameter Default Value
Configurable by:
SMS EKB2 EKB3
Configuration
Tool
Alarm Duration 1 minute
   
EWS2 LED Disabled
 
Bell Squawk Disabled
  
Activate Siren if Wireless Device is Lost Disabled
  