Eldes ESIM264, Руководство по установке

Страница: 35 / 60

68 69 68 69 EN EN MANUAL ELDES ESIM264 V3.2 MANUAL ELDES ESIM264 V3.2
20. WIRED SIREN/BELL
When the system is in alarm state, the siren/bell will sound until the set time (By default – 1 minute) expires or until the system is disarmed.
To set the alarm duration, please refer to the following configuration methods.
Set alarm duration
SMS
SMS text message content:
ssss_SIREN:t
Value: ssss – 4-digit SMS password; t – alarm duration, range – [0... 5] minutes.
Example: 1111_SIREN:4
EKB2
Menu path:
OK → CONFIGURATION → OK → aaaa → OK → PRIMARY SETT INGS → OK → SIREN SETTINGS
→
OK
→
ALARM DURATION
→
OK
→
tt
→
OK
Value: aaaa – 4-digit administrator password; tt – alarm duration, range – [1... 10] minutes.
EKB3
Enter parameter 10 and alarm duration:
10 tt #
Value: tt – alarm duration, range – [00... 10] minutes.
Example: 1007#
Config
Tool
This operation may be carried out from the PC using the ELDES Configuration Tool software.
View alarm duration
SMS
SMS text message content:
ssss_SIREN
Value: ssss – 4-digit SMS password
Example: 1111_SIREN
EKB2
Menu path:
OK → CONFIGURATION → OK → aaaa → OK → PRIMARY SETT INGS → OK → SIREN SETTINGS
→ OK → ALARM DURATION
Value: aaaa – 4-digit administrator password.
Config
Tool
This operation may be carried out from the PC using the ELDES Configuration Tool software.
For siren/bell wiring diagram, please refer to 2.3.3. Siren .
NOTE: 0 value disables the siren/bell.
NOTE: Due to battery power saving reasons, the wireless siren may sound for up 6 minutes max. regardless of the set system alarm
duration time, even if it is set longer than 6 minutes.
20.1. Bell Squawk
If enabled, the siren/bell indicates the completed system arming and disarming process. After the system is successfully armed, the siren/
bell will emit 2 short beeps and 1 long beep after the system is disarmed. To enable/disable the Bell Squawk feature, please refer to the
following configuration methods.
Enable Bell Squawk
EKB2
Menu path:
OK → CONFIGURATION → OK → aaaa → OK → PRIMARY SETT INGS → OK → SIREN SETTINGS
→ OK → BELL SQUAWK → OK → ENABLE → OK
Value: aaaa – 4-digit administrator password.
EKB3
Enter parameter 29 and parameter status value:
29 1 #
Example: 291#
Config
Tool
This operation may be carried out from the PC using the ELDES Configuration Tool software.
Disable Bell Squawk
EKB2
Menu path:
OK → CONFIGURATION → OK → aaaa → OK → PRIMARY SETT INGS → OK → SIREN SETTINGS
→ OK → BELL SQUAWK → OK → DISABLE → OK
Value: aaaa – 4-digit administrator password.
EKB3
Enter parameter 29 and parameter status value:
29 0 #
Example: 290#
Config
Tool
This operation may be carried out from the PC using the ELDES Configuration Tool software.
20.2. Indication by EWS2 - Wireless Outdoor Siren Indicators
When enabled, the built-in LED indicators of EWS2 wireless outdoor siren will flash during the alarm. To enable/disable this feature, please
refer to the following configuration methods.
Enable EWS2 LED
indication
EKB2
Menu path:
OK
→
CONFIGURATION
→
OK
→
aaaa
→
OK
→
PRIMARY SETT INGS
→
OK
→
SIREN SETTINGS
→
OK
→
EWS2 LED
→
OK
→
ENABLE
→
OK
Value: aaaa – 4-digit administrator password.
EKB3
Enter parameter 88 and parameter status value:
88 1 #
Example: 881#
Config
Tool
This operation may be carried out from the PC using the ELDES Configuration Tool software.
Disable EWS2 LED
indication
EKB2
Menu path:
OK → CONFIGURATION → OK → aaaa → OK → PRIMARY SETT INGS → OK → SIREN SETTINGS
→
OK
→
EWS2 LED
→
OK
→
DISABLE
→
OK
Value: aaaa – 4-digit administrator password.
EKB3
Enter parameter 88 and parameter status value:
88 0 #
Example: 880#