MANUAL ELDES ESIM264 V3.2
MANUAL ELDES ESIM264 V3.2
EKB2
Menu path:
Battery level:
OK
→
CONFIGURATION
→
OK
→
aaaa
→
OK
→
WIRELESS DEVICES
→
OK
→
wless-dev wless-id
→
OK
→
BATTERY
Wireless signal:
OK
→
CONFIGURATION
→
OK
→
aaaa
→
OK
→
WIRELESS DEVICES
→
OK
→
wless-dev wless-id
→
OK
→
SIGNAL
Error rate:
OK
→
CONFIGURATION
→
OK
→
aaaa
→
OK
→
WIRELESS DEVICES
→
OK
→
wless-
dev wless-id
→
OK
→
ERROR RATE
Firmware version:
OK
→
CONFIGURATION
→
OK
→
aaaa
→
OK
→
WIRELESS DEVICES
→
OK
→
wless-dev wless-id
→
OK
→
FW RELEASE
Value:
aaaa
– 4-digit administrator password;
wless-dev
– wireless device model;
wless-id
– 8-character wireless device ID code.
Config
Tool
This operation may be carried out from the PC using the
ELDES Configuration Tool
software.
The system supports up to 16 wireless devices. To view the number of unoccupied wireless device slots in the system, please refer to the
following configuration methods
View unoccupied
wireless device slots
SMS
SMS text message content:
ssss_STATUS_FREE
Example:
1111_STATUS_FREE
Config
Tool
This operation may be carried out from the PC using the
ELDES Configuration Tool
software.
19.3. Wireless Signal Status Monitoring
If the wireless signal is lost due to poor signal strength or low battery power on a certain wireless device and does not restore within 1-hour
period (EN 50131-1 Grade 2 requirement), the system will cause an alarm. This event is identified as Wireless Signal Loss. By default, in-
dicated as
Tamper x *
in the SMS text message (x = tamper number; * = wireless signal loss). The user will also be notified by SMS text
message as soon as the wireless signal is restored.
ELDES Configuration Tool
software indicates a timer of the last Test Time signal delivered by a paired and unpaired wireless device. The
software will also warn you if the delivery of the Test Time signal is delayed for a time period 3 times longer than the Test Time period of a
paired wireless device. In case the Test Time signal delivery of an unpaired wireless device is delayed for more than 1,5 minute, a warning
will follow and the icon of such wireless device will be removed from the software’s interface in 10 seconds.
19.4. Disabling and Enabling Siren if Wireless Signal is Lost
If a wireless device loses its wireless signal for 1 hour or longer, the system will send notification by SMS text message to user phone num-
ber and activate the siren/bell. By default, the siren will not be activated when wireless signal is lost. To enable/disable this feature, please
refer to the following configuration methods.
Enable Siren if
Wireless Signal is Lost
EKB2
Menu path:
OK
→
CONFIGURATION
→
OK
→
aaaa
→
OK
→
PRIMARY SETTINGS
→
OK
→
SIREN SETTINGS
→
OK
→
SRN IF WLESS LOSS
→
OK
→
ENABLE
→
OK
Value:
aaaa
– 4-digit administrator password.
EKB3
Enter parameter 76 and parameter status value:
76 1 #
Example:
761#
Config
Tool
This operation may be carried out from the PC using the
ELDES Configuration Tool
software.
Disable Siren if
Wireless Signal is Lost
EKB2
Menu path:
OK
→
CONFIGURATION
→
OK
→
aaaa
→
OK
→
PRIMARY SETTINGS
→
OK
→
SIREN SETTINGS
→
OK
→
SRN IF WLESS LOSS
→
OK
→
DISABLE
→
OK
Value:
aaaa
– 4-digit administrator password.
EKB3
Enter parameter 76 and parameter status value:
76 0 #
Example:
760#
Config
Tool
This operation may be carried out from the PC using the
ELDES Configuration Tool
software.
19.5. EWT1 - Wireless Transmitter-Receiver
Wireless transmitter-receiver EWT1 is an add-on module for ESIM264 system. It enables wireless transmission through alarm system ESIM264
and ELDES wireless devices, such as: wireless magnetic door contacts/shock sensors, wireless zone and PGM output expansion modules,
wireless indoor sirens, wireless outdoor sirens,, wireless smoke detectors and wireless keyfobs.
EWT1 enables ESIM264 alarm system to connect up to 16 wireless devices at a time. Maximum wireless connection range is 150m (492.13ft)
(in open areas).
19.5.1. Electrical and Mechanical Characteristics
Wireless band
ISM868/ISM915
Dimensions
68x38x18mm (2.72x1.50x0.71in)
Operating temperature range
-20...+55°C (-4... 131°F)
Wireless communication range
Up to 30m (98.43ft) in premises;
up to 150m (492.13ft) in open areas
Maximum number of wireless devices
16
19.5.2. Installation
ESIM264
ANTENNA SMA
LED
EWT1
40
1. Disconnect ESIM264 alarm system mains power and backup battery.
2. Insert EWT1 pins into appropriate ESIM264 slots.
3. Mount the antenna to EWT1. It is not recommended to install the antenna inside the metal enclosure.
4. Power up ESIM264 system.
5. EWT1 is ready to use with ESIM264 system.
Содержание ESIM264
Страница 60: ...MadeintheEuropeanUnion www eldes lt...