Action
Step
Immediately close all clamps after removing the wrap from each component.
4
Lay the bag assembly flat on the table and inspect the disposable bag.
Verify that the disposable bag has no tears, rips or cuts.
Note:
Light scratches and creases may be present on the bag due to handling. These
and similar imperfections do not indicate failed bag integrity.
5
Verify that the clamps on all lines are closed.
6
Carefully turn over the bag assembly and remove the bubble wrap and foam
from the impeller baseplate.
7
Remove any additional wrapping at the top of the disposable bag.
8
Result: The disposable bag assembly is ready to be installed into the vessel.
Dispose of the box according to local procedures.
9
Xcellerex XDUO 2500 Mixer Operating Instructions 29146667 AH
161
6 Preparation
6.3 Prepare the disposable bag
6.3.1 Unpack the disposable bag assembly
