Edge-Core AS5700-54X, Справочное руководство CLI, Страница: 738 / 1116

Chapter 26
| DHCP Commands
DHCP Relay
– 738 –
Related Commands
ip dhcp restart relay (738)
ip dhcp restart relay
This command enables DHCP relay for the specified VLAN. Use the no form to
disable it.
Syntax
ip dhcp restart relay
Default Setting
Disabled
Command Mode
Privileged Exec
Command Usage
This command is used to configure DHCP relay functions for host devices attached
to the switch. If DHCP relay service is enabled, and this switch sees a DHCP request
broadcast, it inserts its own IP address into the request so the DHCP server will
know the subnet where the client is located. Then, the switch forwards the packet
to the DHCP server on another network. When the server receives the DHCP
request, it allocates a free IP address for the DHCP client from its defined scope for
the DHCP client’s subnet, and sends a DHCP response back to the DHCP relay agent
(i.e., this switch). This switch then broadcasts the DHCP response received from the
server to the client.
Example
In the following example, the device is reassigned the same address.
Console(config)#ip dhcp restart relay
Console(config)#end
Console#show ip interface
VLAN 1 is Administrative Up - Link Up
Address is 00-00-0C-00-00-FD
Index: 1001, MTU: 1500
Address Mode is DHCP
IP Address: 192.168.0.3 Mask: 255.255.255.0
Proxy ARP is disabled
Console#
Related Commands
ip dhcp relay server (737)