Edge-Core AS5700-54X, Справочное руководство CLI, Страница: 143 / 1116

Chapter 4
| System Management Commands
Line
– 143 –
Command Mode
Global Configuration
Command Usage
Telnet is considered a virtual terminal connection and will be shown as “VTY” in
screen displays such as
show users . However, the serial communication parameters
(e.g., databits) do not affect Telnet connections.
Example
To enter console line mode, enter the following command:
Console(config)#line console
Console(config-line)#
Related Commands
show line (152)
show users (123)
databits
This command sets the number of data bits per character that are interpreted and
generated by the console port. Use the
no form to restore the default value.
Syntax
databits { 7 | 8 }
no databits
7 - Seven data bits per character.
8 - Eight data bits per character.
Default Setting
8 data bits per character
Command Mode
Line Configuration
Command Usage
The databits command can be used to mask the high bit on input from devices
that generate 7 data bits with parity. If parity is being generated, specify 7 data bits
per character. If no parity is required, specify 8 data bits per character.
Example
To specify 7 data bits, enter this command:
Console(config-line)#databits 7
Console(config-line)#