manualshive.com logo in svg

Edge-Core AS5700-54X, Справочное руководство CLI, Страница: 480 / 1116

Поделиться
Скачать
Edge-Core AS5700-54X Скачать руководство пользователя страница 480

Chapter 18

  |  VLAN Commands

Configuring VLAN Interfaces

–  480  –

switchport native vlan

This command configures the PVID (i.e., default VLAN ID) for a port. Use the 

no

 form 

to restore the default.

Syntax 

switchport native vlan

 

vlan-id

no switchport native vlan

vlan-id

 - Default VLAN ID for a port. (Range: 1-4094)

Default Setting 

VLAN 1

Command Mode 

Interface Configuration (Ethernet, Port Channel)

Command Usage 

◆

When using Access mode, and an interface is assigned to a new VLAN, its PVID 
is automatically set to the identifier for that VLAN. When using Hybrid mode, 
the PVID for an interface can be set to any VLAN for which it is an untagged 
member.

◆

If acceptable frame types is set to 

all

 or switchport mode is set to 

hybrid

, the 

PVID will be inserted into all untagged frames entering the ingress port.

Example 

The following example shows how to set the PVID for port 1 to VLAN 3:

Console(config)#interface ethernet 1/1

Console(config-if)#switchport native vlan 3

Console(config-if)#

vlan-trunking

This command allows unknown VLAN groups to pass through the specified 
interface. Use the 

no

 form to disable this feature.

Syntax 

[

no

] 

vlan-trunking

Default Setting 

Disabled

Command Mode 

Interface Configuration (Ethernet, Port Channel)

Command Usage 

◆

Use this command to configure a tunnel across one or more intermediate 
switches which pass traffic for VLAN groups to which they do not belong. 

Содержание AS5700-54X





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов