manualshive.com logo in svg

Edge-Core AS5700-54X, Справочное руководство CLI, Страница: 406 / 1116

Поделиться
Скачать
Edge-Core AS5700-54X Скачать руководство пользователя страница 406

Chapter 11

  |  Link Aggregation Commands

MLAG Commands

–  406  –

interface

 

ethernet

 

unit

/

port

unit

 - Unit identifier. (Range: 1) 

port

 - Port number. (Range: 1-32/54)

port-channel

 

channel-id

 (Range: 1-16/27) 

Command Mode 

Global Configuration

Command Usage 

◆

An MLAG domain can have two and only two MLAG devices. (See 

Figure 1

.)

◆

An MLAG domain may have many MLAGs.

◆

An MLAG can belong to one and only one MLAG domain.

◆

The associated MLAG domain may be nonexistent, which causes the MLAG to 
be inactive locally.

◆

There can be one and only one MLAG member for each MLAG on an MLAG 
device.

◆

The MLAG member can be a normal port or a static trunk.

◆

An MLAG member is active if the MLAG ID is set and the associated MLAG 
domain is active.

◆

An MLAG member is active if the MLAG ID is set and the associated MLAG 
domain is active.

◆

An MLAG is formed when the peer MLAG members are both active. 

◆

The following items apply when an MLAG is formed.

■

When an MLAG member is operationally up and the MLAG peer member is 
not operationally down, all traffic from the peer link can not be forwarded 
to the MLAG member.

■

When an MLAG member is operationally up and the MLAG peer member is 
operationally down, all traffic from the peer link can be forwarded to the 
MLAG member.

■

When an MLAG member is operationally up, all updates for learned MAC 
addresses on the MLAG peer member will be synced to the MLAG member 
automatically.

Содержание AS5700-54X





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов