Edge-Core AS5700-54X, Справочное руководство CLI, Страница: 428 / 1116

Chapter 14
| Loopback Detection Commands
– 428 –
show loopback-
detection
This command shows loopback detection configuration settings for the switch or
for a specified interface.
Syntax
show loopback-detection [ interface ]
interface
ethernet unit / port
unit - Unit identifier. (Range: 1-8)
port - Port number. (Range: 1-52)
Command Mode
Privileged Exec
Command Usage
Although global action may be set to None, this command will still display the
configured Detection Port Admin State and Information Oper State.
Example
Console#show loopback-detection
Loopback Detection Global Information
Global Status : Enabled
Transmit Interval : 10
Recover Time : 60
Action : Shutdown
Trap : None
Loopback Detection Port Information
Port Admin State Oper State
-------- ----------- ----------
Eth 1/ 1 Enabled Normal
Eth 1/ 2 Disabled Disabled
Eth 1/ 3 Disabled Disabled
.
.
.
Console#show loopback-detection ethernet 1/1
Loopback Detection Information of Eth 1/1
Admin State : Enabled
Oper State : Normal
Looped VLAN : None
Console#