manualshive.com logo in svg

Edge-Core AS5700-54X, Справочное руководство CLI, Страница: 1038 / 1116

Поделиться
Скачать
Edge-Core AS5700-54X Скачать руководство пользователя страница 1038

Chapter 30

  |  Multicast Routing Commands

PIM Multicast Routing

–  1038  –

Info source      : static

Uptime           : 00:00:21

Expire           : Never

Console#

ip pim rp-candidate

This command configures the router to advertise itself as a Rendezvous Point (RP) 
candidate to the bootstrap router (BSR). Use the 

no

 form to remove this router as 

an RP candidate.

Syntax 

ip pim rp-candidate interface vlan

 

vlan-id 

[

group-prefix

group-address mask

]

[

interval

 

seconds

] [

priority

value

] 

no

 

ip pim rp-candidate interface vlan

 

vlan-id

vlan-id

 - VLAN ID (Range: 1-4094)

group-address

 - An IP multicast group address. If a group address is not 

specified, the RP is advertised for all multicast groups. 

mask

 - Subnet mask that is used for the group address.

seconds

 - The interval at which this device advertises itself as an RP 

candidate. (Range: 60-16383 seconds)

value

 - Priority used by the candidate RP in the election process. The RP 

candidate with the largest priority is preferred. If the priority values are the 
same, the candidate with the larger IP address is elected to be the RP. 
Setting the priority to zero means that this router is not eligible to server as 
the RP. (Range: 0-255) 

Default Setting 

Address: 224.0.0.0/4, or the entire IPv4 multicast group family
Interval: 60 seconds
Priority: 0 

Command Mode 

Global Configuration

Command Usage 

◆

When the 

ip pim rp-candidate

 command is entered, the router periodically 

sends PIMv2 messages to the BSR advertising itself as a candidate RP for the 
specified group addresses. The IP address of the designated VLAN is sent as the 
candidate’s RP address. The BSR places information about all of the candidate 
RPs in subsequent bootstrap messages. The BSR uses the RP-election hash 
algorithm to select an active RP for each group range. The election process is 
performed by the BSR only for its own use. Each PIM-SM router that receives the 
list of RP candidates from the BSR also elects an active RP for each group range 
using the same election process. 

Содержание AS5700-54X





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов