Edelbrock Pro-Tuner, Руководство пользователя

Страница: 204 / 235

204
and trigger. First, check the STATUS indicators.
If you see the GREEN "Data Available" light lit, it indicates that you have a previously
recorded data. You can click on the "
VIEW " button to view this data, or you can ignore
it, set up new parameters and re ARM the trigger (which will erase the previously
recorded data). If you decide to save the data after you've start to choose new
parameters, you can "
CANCEL " and it will not affect the recorded data.
The YELLOW "Armed" light indicates the ECU is waiting to trigger and will start recording
based on the parameters and trigger you have selected. The light will BLINK while the
ECU erases the on board data log and resets the trigger. It will then light a constant
YELLOW when Armed.
The RED "Recording" light indicates the ECU has been triggered and is actively recording.
To choose the parameters you wish to record, use the drop down lists to choose any
variety of parameters up to a maximum of six (6). The fewer parameters logged, the
longer the available time is for the chosen parameters.
Next, set your record trigger condition. This will tell the ECU what to use as a "trigger" to
start recording. The parameters available are RPM, TPS (in %) or an External Switch.
After you've chose the parameter choose the "operator" (greater than equal or less than
equal) and then type in the desired value.