Versatrax 150™
Document: UMDW014058.docm
Revision: A03
Created by: KW
Date: 10 Oct 2019
3075415-A03
Source Location: C:\ePDM\ISLEng\products\dw-versatrax150mkii\manuals\UMDW014058.docm
Page 25 of 57
User Ma
nual
Spectrum 120HD™ Installation
Because of the larger connector on the SP120HD
™ camera, it is necessary to use spacers behind the
camera to make room for the connector as shown in
Error! Reference source not found.
. Thread the
spacers into the back of the camera and mount using 3x M6 x 16 mm SHCS as per the previous section.
Spectrum 120
™ Bumper Bars
Bumper bars for the Spectrum 120 are installed directly onto the camera’s rotating head. Typically, the
bumper bars are installed at the factory during system assembly but can be retrofitted as follows:
1.
Remove the two rear
screws (M6 x 14 mm
SHCS)
from
the
camera side-plates
–
do one side plate at a
time and make sure
to hold the side-plate
secure so it does not
come loose from the
camera.
2. Install the bumper bar
assembly using 2x
M6 x 30 mm SHCS
–
use blue Loctite 243
.
Removal is the reverse of installation