Eddyfi Technologies Inuktun Versatrax 150 Analog, Руководство пользователя

Страница: 34 / 57

Versatrax 150™
Document: UMDW014058.docm Revision: A03 Created by: KW Date: 10 Oct 2019 3075415-A03
Source Location: C:\ePDM\ISLEng\products\dw-versatrax150mkii\manuals\UMDW014058.docm Page 34 of 57
User Ma
nual
Advanced Accessories
Minitrac
™ Length Extensions
Extensions may be added to the Minitracs
™ to increase their length by 114 mm (4.5 in) to improve
vehicle stability and increase weight. The tracks mount to the chassis as normal, and configurations will
function as normal
– with the exception that the 901 lights must be removed for use in 300 mm (12 in)
pipe. Refer to the section above on Spectrum 120
™ Bumper Bars
Bumper bars for the Spectrum 120 are installed directly onto the camera’s rotating head. Typically, the
bumper bars are installed at the factory during system assembly but can be retrofitted as follows:
3. Remove the two rear screws (M6 x 14 mm SHCS) from the camera side-plates
–
do one side plate
at a time and make sure to hold the side-plate secure so it does not come loose from the camera.
4. Install the bumper bar assembly using 2x M6 x 30 mm SHCS
–
use blue Loctite 243 .
Removal is the reverse of installation