Versatrax 150™
Document: UMDW014058.docm
Revision: A03
Created by: KW
Date: 10 Oct 2019
3075415-A03
Source Location: C:\ePDM\ISLEng\products\dw-versatrax150mkii\manuals\UMDW014058.docm
Page 41 of 57
User Ma
nual
Inline Vehicle
Minitrac™ Installation
WARNING:
Pinch Hazard.
Keep your fingers and hands out of the X-Hinge. Do
not hold or lift the vehicle by the X-Hinge. Severe pinching and hand injury may
result. Always use the handles next to the hinge for lifting.
All fasteners are M6 x 16 mm SHCS as illustrated above.
1. Lay the vehicle on the work bench with the tracks in the orientation shown. The far side plates
may remain attached to the handles and hinges as shown.
2.
Plug the mating connectors into the tracks
–
make sure to align pins and grease the male
connectors
3. Attach the tracks to the far side plates.
4. Attach the free side plates to the tracks, handles and hinges.