Versatrax 150™
Document: UMDW014058.docm
Revision: A03
Created by: KW
Date: 10 Oct 2019
3075415-A03
Source Location: C:\ePDM\ISLEng\products\dw-versatrax150mkii\manuals\UMDW014058.docm
Page 31 of 57
User Ma
nual
Track Height Extensions
Track extension plates simply bolt onto the outer hinges using M6 x 16mm socket cap screws. The tracks
then bolt onto the extension plates as they normally would on the chassis as explained in the previous
section. Extension plates increase the ground clearance of the vehicle from 41
– 69 mm (1.6 – 2.7 in),
depending on chassis configuration. With the extensions installed, the pipe sizes on the indicator plaque
are read from the
XT
column. Also note that the distance from the face of the P-Clips (see preceding
section) to the face of the Minitrac™ connectors must be increased from 310 mm (12 in) to 380 mm (15in)
by extracting cable length from inside the track hinges, and an additional 8 mm (0.31 in) P-Clip must be
installed on the inside extension plate in the hole provided.
