Versatrax 150™
Document: UMDW014058.docm
Revision: A03
Created by: KW
Date: 10 Oct 2019
3075415-A03
Source Location: C:\ePDM\ISLEng\products\dw-versatrax150mkii\manuals\UMDW014058.docm
Page 23 of 57
User Ma
nual
Spectrum 90™ Installation
The Versatrax 150™ can mount any of the Spectrum 90/120/120HD™ cameras. Installation is typical for
all three camera types as follows:
1. Adjust the camera bed to the position shown below. This will allow access to the camera
mounting screws. If a motorized camera raise mechanism is installed the system will need to be
powered up and raised into position.
ALWAYS
turn off the system before working near the raise
mechanism pinch points, which may cause injury to fingers and hands.
2. The purge valve indicates the top of the camera, as shown in
Error! Reference source not
found.
. Mount the camera with the valve on top.
3. Slide the camera into position from the front of the camera bed.