Versatrax 150™
Document: UMDW014058.docm
Revision: A03
Created by: KW
Date: 10 Oct 2019
3075415-A03
Source Location: C:\ePDM\ISLEng\products\dw-versatrax150mkii\manuals\UMDW014058.docm
Page 27 of 57
User Ma
nual
Light Mount For Extended Tracks
When the extended tracks are installed, a different light bracket must be used to avoid interference
between the end of the tracks and the lights.
WARNING:
Reduced Clearance.
With the 901 lights installed with the extended
tracks, the vehicle will no longer fit into a 305 mm (12 in) ID pipe. Minimum pipe
size is increased to 355 mm (14 in)
To install the light mount:
1. Disconnect the lights and remove the regular light mounts from the frame.
2. Remove the camera
3. Remove the bumper bar holder (3/8-16 x 6 in SHCS).
4. Slide the light holder bracket over the bumper bars until it is 19 mm (0.75 in) away from the
back plate.
5. Use 2x M6 x 10 mm nylon tipped SSCREWs to secure holder to the bumper bars.
6. Reinstall the bumper bar holder and camera.
7. Install the lights onto the brackets using 2x M6 x 16 mm SHCS.
