Versatrax 150™
Document: UMDW014058.docm
Revision: A03
Created by: KW
Date: 10 Oct 2019
3075415-A03
Source Location: C:\ePDM\ISLEng\products\dw-versatrax150mkii\manuals\UMDW014058.docm
Page 8 of 57
User Ma
nual
WARNING:
Intense Optical Radiation
- The
Versatrax 150™ camera lights and
901 auxiliary lights are extremely bright and can cause temporary flash blindness.
Never look directly at the lights, or even from a shallow angle. Use a welding filter
(shade #8 or higher) if inspecting the LEDs.
CAUTION: Class II Laser:
The Spectrum 90/120
™ camera may
be equipped with laser lines. Do not intentionally stare into the
beam. Typically, Class II relies on the blink reflex to limit exposure
to no more than ¼-second. Intentionally staring into the beam can
cause eye injury.
•
When performing maintenance or functional checks of the
lasers and camera lights, take precautions to protect
nearby personnel from unintended exposure which could
be temporarily blinding.
•
Observe safe lifting and handling practices. Component parts of the Inuktun Versatrax 150
™
system are heavier than the recommended lifting load for a single person. Two people are
recommended for lifting the vehicle.
•
Never drop the vehicle. Although built tough, the vehicle is heavy and can suffer structural
damage when dropped.
•
Prevent impact to the front of the 901 lights, Spectrum 90/120™ camera and Inuktun Sapphire™
cameras as they can suffer damage.
•
Eddyfi equipment is used in many varied environments from hot/dry to confined spaces to deep
underwater. Such diverse environmental risks must be addressed by the operators who are
trained to work in such surroundings. As such, the operators are responsible to determine safe
site setup, work procedures and appropriate personal protective equipment (PPE) for setup and
operation of the equipment.
WARNING: Trip Hazard
- Never stand on the tether. The vehicle and winch are
strong enough to pull it out from underneath you and cause you to fall. Standing
on the tether may also cause damage to the internal conductors and decrease the
life of the protective jacket.
WARNING: High Temperature
- The camera head, 901 lights and harness block
may become extremely hot during operation. Always wear protective gloves when
handling these parts of the vehicle after they have been in use. Allow a cool-down
period before handling without gloves.
WARNING: Spark Hazard
- Under no circumstances should this equipment be
used in a potentially explosive atmosphere
