ECONOLITE ZincBlue2 UPS 1000W, Руководство пользователя

Страница: 82 / 92

79 | ZincBlue2 User Manual
ZincBlue2 Battery Panel & Battery Module
The Battery Panel and Battery Module are identical 500W battery packages with different form factors. These
devices will continuously monitor the six internal nickel-zinc battery strings to make sure they are properly charged
and discharged. The device will generally be in one of three states: Charging (Blue LED is ON), Discharging (Green
LED is ON), or Monitoring the Batteries (White LED is blinking). A fault (Red LED is ON) can occur and will be in a
state where it can neither charge or discharge. These devices communicate via CAN bus across the battery Digital
and DC Power Interconnect Cable with the ZincBlue2 UPS 1000W/1500W. Upon loss of power the ZincBlue2 UPS
1000W/1500W will signal the Battery Panel/Battery Module to enable its battery DC bus to supply 57-43Vdc to the
ZincBlue2 UPS 1000W/1500W which will convert the battery DC bus to 120Vac Pure Sine wave to support up to a
1000W load. When not charging or discharging the batteries will be in “monitor mode” with a self-discharge of ap-
proximately 3% per month (depending on temperature and state of charge). When battery voltage drops below a set
threshold due to self-discharge, the batteries will perform a top off charge.
ZincBlue2 Battery Panel and Module Block Diagram