ECONOLITE ZincBlue2 UPS 1000W Скачать руководство пользователя

Страница: 13 / 92

ZincBlue2 User Manual | 10

Batteries

ZincBlue2 Battery Panel & Battery Module Introduction

The ZincBlue2 Batteries are available in two form factors, the ZincBlue2 Battery Panel and ZincBlue2 Battery

Module. Both are 500W form factors operating with nickel-zinc batteries and an intelligent battery management

system. The batteries can be charged with either the ZincBlue2 UPS 1000W/1500W or the Wall Charging Adapter.

ZincBlue2 Battery Panel & Battery Module Overview

1. COLD START

Manually cold start the ZincBlue2 u

sing the batteries to enable quick startup of an intersection. With a battery

panel or module connected to a UPS, push and hold for 5 seconds for immediate system cold startup. Hold for 10

seconds to turn off.

2. BATTERY OUTPUT

The connection point between the Battery and UPS via the provided Digital and DC Power Interconnect Cable.

3. AC INPUT

The connection point between the Battery and PIM. Use the provided Locking AC Power Interconnect Cable.

4. HANDLE

Used for lifting the battery panel.

5. STATUS

A multi-color LED indicators that provides battery status

•

Green = Backup Mode

•

Blue = Charging Mode

•

Red = Battery Fault

•

White Blinking = Charged, battery at rest

FORCE OFF

Press and hold the Cold Start button for 10 seconds to turn off the Battery Panel/Module.

Hot Swapping when in discharge mode, you should do/see the following:

1. Connect the new battery to the controller via the DC interconnect cable. New battery LED should turn on

(Green), and be recognized by the controller.

2. Disconnect DC and AC cable from depleted battery and remove.

3. Connect the AC cable to the new battery. Disconnecting the depleted batteries before connecting fresh batter-

ies may cause premature system shutoff when in discharge mode.

When the system is in Normal/AC mode, the AC and the DC cables will both need to be connected to the battery

to turn it on and have it be recognized by the controller.

ZincBlue2 Battery Panel 500W

ZincBlue2 Battery Module 500W

Содержание ZincBlue2 UPS 1000W




























































































Результаты поиска

Содержание ZincBlue2 UPS 1000W

Отзывы:

Похожие инструкции для ZincBlue2 UPS 1000W

Бренды по названию

Популярные бренды

ECONOLITE ZincBlue2 UPS 1000W, Руководство пользователя

Результаты поиска

Содержание ZincBlue2 UPS 1000W

Отзывы:

Похожие инструкции для ZincBlue2 UPS 1000W

Бренды по названию

Популярные бренды