ECONOLITE ZincBlue2 UPS 1000W, Руководство пользователя

Страница: 52 / 92

49 | ZincBlue2 User Manual
STATUS

SETTINGS

EVENTS LIST

DEFINE EVENT

SYSTEM FAULT
Description:
Enable the trigger which is armed whenever a System Fault is detect. System Faults turns on the Red LED on the UPS. Refer to the
ZincBlue2 Software section of this manual for all possible events recorded by the ZincBlue2 Software.
On The Display:
• Press the BACK button when you are finished configuring this trigger. You will be taken back to the DEFINE EVENT screen
where you can configure additional triggers for this relay, or, take the final steps of configuring a SYSTEM FAULT event by
going to the RELAY screen to select a relay to perform that outcome and finalize the steps described in the
EVENT SAVE CONFIRMATION section of this manual.
Edit System Fault Trig: ON
Edit System Fault Trig: OFF