V&T Technologies Co., Ltd.
http://www.ecodrivecn.com
Appendix B Control Mode Setting Process
145
4. Setting Process for Composite Control
START
Parameter identification (For details, refer to
setting process for parameter auto-tuning under
vector control 1 in appendix B)
END
Vector control 1?
Parameter identification (for details, refer to
setting process for parameter auto-tuning
under vector control 2 in appendix B)
P0.03=3
P0.03=7
Y
N
Go to process close loop control
process a, and go over all the process
of process close loop.
Select Open loop main reference mode
P0.04 (For details, refer to the function
description of P0.04 in Chapter 6)
Select open loop main and auxiliary
relation calculation P1.01 (For details,
refer to the function description of P1.01
in Chapter 6)
Open loop auxiliary reference ?
Select open loop auxiliary reference
mode P1.00?(For details, refer to the
function description of P1.00 in Chapter
6)
Multi digital voltage reference?
Multi voltage reference function of terminal X?
(For details, refer to the function description of
P5.00 to P5.06 in Chapter 6)
Setting correct
P4.15
～
P4.21
Multi frequency reference?
Multi frequency reference function of terminal X?
(For details, refer to the function description of
P5.00 to P5.06 in Chapter 6)
Setting correct
P4.22
～
P4.36
Select Analog
channel ?
Select Analog channel ?
Setting P6.00
～
P6.20 (For
details, refer to the function
description of P6.00 to P6.20 in
Chapter 6)
Setting P6.00
～
P6.20
(For details, refer to the
function description of P6.00
to P6.20 in Chapter 6)
N
Y
N
Y
N
Y
Y
N
Y
N
Process open loop +process
close loop?
P1.08=1
P1.08=0
N
Y
