Eco Drive V5-H Series Скачать руководство пользователя страница 11

Страница: 11 / 168

V&T Technologies Co., Ltd.

http://www.ecodrivecn.com

Customized Functions



Multiple Function Code Display Modes



bASE: Basic menu mode (refer to 5.1 basic menu function code parameter table),

displays all the function codes.



FASt: Fast menu mode, is especially suitable for the naive users.



ndFt: Non-leave-factory value menu mode, it only displays the function codes different

from the leave-factory values to facilitate the inquiry and commissioning.



LASt: Last change menu mode, it displays the 10 functions codes that are recently

changed and P0.02 to facilitate the inquiry and commissioning.



The users can define the function codes for inquiry and modification by themselves.



Multiple Function Code Encryption Modes (to Protect the Intellectual

Property of the Customers)



The user can encrypt any group function codes by themselves.



The user can lock operation panel.



The user can set function parameter password protection.



The technical secrets, such as system specific process parameters, cannot be copied.



User Self-defined Parameter Display Function



The user can choose the common parameters displayed by the operation panel and

use to >> key switch such parameters.



The user can define the parameters displayed upon running and stopping respectively.



The user can define such parameters as pressure, temperature, flux and line speed.



The User can Make Secondary Development



Universal expansion port is provided as standard.



Physical port SPI bus, software protocol Modbus.



The ports p24V, ±15V and 5V power supply and two ways of A/D input.



The CPU expansion scheme can realize PLC function.



It supports the programming by user to realize process control.



Enhanced Function



The software filtering time for the AI1, AI2 and AI3 analog input is settable to enhance

the anti-interference capability.



Independent multi-section modification can be made on the AI1, AI2, AI3 and DI analog

input curve.



Multi-section speed setting is provided, with 16 speeds as standard, and up to 23

speeds.



With a maximum output frequency of 3000Hz, it is applicable to such equipment as

Содержание V5-H Series









































































































































































Результаты поиска

Содержание V5-H Series

Отзывы:

Похожие инструкции для V5-H Series

Бренды по названию

Популярные бренды

Eco Drive V5-H Series, Руководство пользователя

Результаты поиска

Содержание V5-H Series

Отзывы:

Похожие инструкции для V5-H Series

Бренды по названию

Популярные бренды