Eco Drive V5-H Series, Руководство пользователя

Страница: 155 / 168

V&T Technologies Co., Ltd. http://www.ecodrivecn.com
Appendix A Modbus Communication Protocol 135
Register
address
Name of Parameters
Register
address
Name of Parameters
Note: The virtual terminals from LSB to MSB are X1, X2, X3, X4, X5, X6, X7, AI1, AI2, AI3, Y1, Y2 and relay, bit13
~ bit15 are reserved.
 Register for status word of the inverter.
Attached Table-3
Register Name of Parameters Precision Register Name of Parameters Precision
0x810B Equipment status word 1 0x8114
Display parameters of
stopping status
According to
currently stopping
display
0x810E Equipment status word 4 0x8116
Display parameters of
running status
According to
currently running
display
0x8120 Reference frequency
（
Hz
）
0.01Hz 0x8180 Reference frequency
（
Hz
）
0.01Hz
0x8122 Bus voltage(V) 1V 0x8182 Bus voltage(V) 1V
0x8124 AI1
（
V
）
0.01V 0x8184 AI1
（
V
）
0.01V
0x8126 AI2
（
V
）
0.01V 0x8186 AI2
（
V
）
0.01V
0x8128 AI3
（
V
）
0.01V 0x8188 AI3
（
V
）
0.01V
0x812A DI
（
%
）
0.1% 0x818A DI
（
%
）
0.1%
0x812C External counts 1 0x818C External counts 1
0x812E Rotate speed of motor 1 0x818E Rotate speed of motor 1
0x8130 Close loop reference (%) 0.1% 0x8190 Close loop reference (%) 0.1%
0x8132 Close loop feedback (%) 0.1% 0x8192 Close loop feedback (%) 0.1%
0x8134 Reference torque(%) 0.1% 0x8194 Reference torque (%) 0.1%
0x8136 Operating frequency (Hz) 0.01Hz 0x8196 Reserved
0x8138 Output current(A)
0.1A or
0.01A
0x8198 Reserved
0x813A Output torque(%) 0.1% 0x819A Reserved
0x813C Output power (kW) 0.1kW 0x819C Reserved
0x813E Output voltage(V) 1V 0x819E Reserved
Note
：
0x8121
～
0x819Fodd numbers are display attribute word
，
from LSB to MSB are Hex/Dec for 1bit, precision for 2bit,
modification for 2bit and unit for 3Bit.
The register addresses 0x8120 ~0x813F refer to the display parameters corresponding to P2.02, while the register
addresses 0x8180 ~0x8193 refer to the display parameters corresponding to P2.03.
The inverter of 3.7kw and below,the output current display precision is 0.01A, 5.5kw and above output current
display precision is 0.1A,