58
Instruction Manual IM02602008E - Rev. D
Transformer Temperature Controllers
IM02602008E - Rev. D May 2019 www.eaton.com
otee:
N
Because these reports are available only for TC-100 devices a TC-100
device must be properly connected to the computer with a USB cable or a
TC-100 configuration must be opened before selecting the Reports option.
Refer to Section 4.2.4.1 Creating Configuration Files or 4.2.4.2 Open
an Existing Configuration to open a TC-100 configuration. All reports are
generated from data that was previously downloaded from TC-100 units
connected to the laptop. For the most up-to-date reports, connect to the
desired TC-100 unit(s) and collect the latest data using the Trend/Log Data
option of the Device functions prior to accessing the Reports options. See
section 4.2.5.1, Trend/Log Data..
4.2.6.1 Trend Graph
The
Trend Graph
option allows you to select the trend data desired and dis-
play a graph of that data.
Select
Trend Graph
on the reports options bar to display the set-up menu.
1. Select the transformer desired from the pull down menu.
2. Specify the starting date and time for the desired trend data by directly enter-
ing the
Start Date Time
, or click on the pull down menu to display a calen-
dar, as shown below.
