54
Instruction Manual IM02602008E - Rev. D
Transformer Temperature Controllers
IM02602008E - Rev. D May 2019 www.eaton.com
1. Select the transformer desired from the
Transformer Name
pull down list, or
if you are collecting data from a TC device for the first time type a new name
into the
Transformer Name box
.
otee:
N
Use care when entering a new Transformer Name because there is no way
to modify it after entry.
2. Check the C
ollect All Data
check box to collect all the available data. This will
check all other checked boxes.
3. Check individual check boxes to collect only specific data (Trend Log, Alarm
Log, Trip Log, or Fan Wear Indicator). Only the data checked will be collected.
otee:
N
Prior to clicking Collect Date ensure that the TC-100 device is properly con-
nected to the PC with a USB cable and the Online indication in the upper
right corner of the TC-100 Transformer Wellness software screen applica-
tion is On.
4. Click
Collect Data
to collect the data specified from the TC-100. The
Messages box will display each data item as it is collected. The data is read
very quickly so typically only the last data type message is seen.
4.2.5.2 Upgrade Firmware
The
Upgrade Firmware
option allows you to download a file to upgrade the
firmware of a connected TC device.
CAUTION
THE FIRMWARE FILE MUST BE IN HEXADECIMAL (*.HEX) FORMAT AND
OBTAINED FROM EATON CUSTOMER SUPPORT OR WEB SITE SPECIFICALLY
FOR THIS PRODUCT. UPGRADING WITH AN IMPROPER FILE COULD RESULT
IN LOSS OF PRODUCT FUNCTIONALITY AND/OR DAMAGE TO THE TC-100 OR
THE EQUIPMENT IT IS CONNECTED TO.
PLEASE CAREFULLY READ ANY INSTRUCTIONS INCLUDED WITH THE
UPGRADE FILE PERTAINING TO CONFIGURATION AND TREND/LOG DATA
PRIOR TO UPGRADING.
Select
Upgrade Firmware
To display the
Upgrade Firmware
dialog box.
otee:
N
You can select a file by entering its file name or selecting it from a list.
