![background image](http://html1.mh-extra.com/html/eaton/emr-3mp0/emr-3mp0_installation-operation-and-maintenance-manual_3982316125.webp)
3.6.1.1
Application Example: Setting a Relay
RO
Signal Set Relay
Signal Reset Relay
Pulse Signal
Pulse Signal
Logic
Assign Logic Functions onto Relay Inputs
E_E10
OR
OR
Binary Output signals of the DNP cannot directly be used in order to switch relays
because the DNP Binary Outputs are pulse signals (by DNP definition, not steady state).
Steady states can be created by means of Logic functions. The Logic Functions can be
assigned onto the Relay Inputs.
Please note: You can use a Set/Reset element (Flip Flop) from Logics.
125
www.eaton.com
EMR-3MP0
3 Communication Protocols
3.6 DNP3